Tuesday, December 23, 2014

Workplace Solutions For Wet Areas

Slip and fall prevention is usually the main concern in wet and oily working environments.  Slip and falls account for approximately 20 -30% of the accidents which cause long-tern interruption of work and loss of productivity.

The 4 main causes of slips and fall accidents are:
  • Slippery/wet surfaces
  • Slippery surfaces caused by dry floor contaminants such as sawdust
  • Obstructions, both temporary and permanent
  • Uneven surfaces and changes of level

Date from NIOSH (National Institute of Occupational Safety & Health) on reported workplace accidents also cited overexertion and repetitive work as contributing factor to long-term absenteeism.  Combined, these two factors are the largest cause of non-fatal injury and illness cases involving days away from work*.

We offer a wide variety of high-performance anti-fatigue and anti-slip floor matting products with very specific functionality designed to address slippery work environments and the varying causes of slip and fall accidents.

To see our Anti-Slip and Anti-Fatigue Products CLICK HERE.

Increased Traction

Floors can become dangerously slippery when they are wet, exposed to water, oil, grease, industrial chemicals, and even soap or cleaning solutions.  Floor matting elevates the worker out of the liquid providing a dryer work and walking surface.  In extreme cases, aggressive surface textures or materials such as the Silicon Carbide grit surface found on all NoTrax® Cushion-Ease® GSII products offers added traction in even the harshest slippery environments.  

Remove Debris & Liquids

Floors can also become slippery when there is an accumulation of liquids, dusty floor contamination such as sawdust, and other debris on the work area floor. Floor matting used in these areas typically has a large-hole drainage system that drains or removes the liquid or debris from the work area keep the surface clean and clear.

Anti-Fatigue

Standing on hard surfaces for extended periods can lead to several problems such as pain, discomfort, and fatigue, all of which have a direct negative impact on a worker's balance.  The use of anti-fatigue floor mats provides a cushioning effect that improves circulation and alleviates the symptoms that can lead to fatigue.  This enables proper balance for the worker lessening the possibility of a slip or fall due to muscle fatigue.

*Source: NIOSH
& Superior Manufacturing Group, Inc. NoTrax Catalog 47, page 20

Friday, December 5, 2014

What is the Importance of a Message Mat?

First you might ask... What is a Message Mat?  

A Message Mat is a pre-printed highly visible mat to warn employees who may be entering a hazardous area, may need special ear or eye protection, or just act as a reminder to think and act safely in work environments.  

Now why is this important to your company?  Having a message mat at proper locations in your facility will assist employees to be more aware of their surroundings.  This in turn should reduce the risk of accidents. 

FloorMatShop offers a variety of Message Mats from Wiper, Anti-Fatigue, and Scraper. Below you can see the difference of each style to see what will work best for you.

Waterhog Sign Message Mats 


To view Waterhog Sign Message Mats in our store click here.
  • Perfect for high traffic areas where a message mat with scraper/wiper capability is needed
  • 3/8" thick, 100% UV resistant polypropylene fabric for indoor and outdoor placements
  • Molded rubber backing resists curling and cracking in all types of weather. Available in smooth and cleated backing types.
  • Earth-Friendly rubber backing has 20% post-consumer recycled content
  • Sign is molded into the rubber
Available in 3' x 5' and 4' x 6'
*Sizes are approximate. Sign Message Is placed in the lower right corner of the mat in either a horizontal or vertical direction.

Message Size: 7.5" x 13"


Hog Heaven Sign Message Mats


To view Hog Heaven Sign Message Mats in our store click here.
  • Anti-fatigue mats that convey safety messages
  • Nitrile rubber top surface has a 20% recycled content
  • Closed cell Nitrile blended cushion is permanently molded (not glued) to the Nitrile rubber top surface
  • Chemical Resistant, Grease & Oil Proof
  • Static Dissipative and certified slip resistant by the National Floor Safety Institute
  • 5/8" and 7/8" thickness
  • Borders are beveled and are available in black or OSHA approved yellow
Available in 3' x 5' and 4' x 6'
*Sign Message is placed in the center of mat in either a horizontal or vertical direction

Message Size: 7" x 14"



Superscrape Sign Message Mats


To view Superscrape Sign Message Mats in our store click here.
  • Sign images are produced by molding a digitally printed polymeric material into a durable Nitrile rubber mat
  • Signs are UV resistant and perform well in all types of environments
  • Superscrape Sign are perfect for any application where a message mat with scraper capability is needed.
  • Superscrape Sign mats are available in either horizontal or vertical orientations
Available in 3' x 5' and 4' x 6'
*Sizes are approximate. Sign Message Is placed in the lower right corner of the mat in either a horizontal or vertical direction.

Message Size: 7.5" x 13"
_________________________________________________________

If you have any questions on our message mats you can email sales@floormatshop.com or call 888-226-2724.

VIEW ALL THE MESSAGE MATS
 IN OUR STORE! CLICK HERE